BELLEVUE

This Beautiful railing insert design offers a hint of Asian beauty but while it has a strong, durable, and prestigious feel, it will accessorize your home from dusk to dawn.

Benefits

No Knots
Balusters will not twist
Stronger / Harder *
Better Rot Resistance *
Better Insect Resistance *
Removable for Maintenance
Easy to install
Keep your existing Posts & Rails** *
Made in USA
1 Year Warranty
Available Height30 .5″
Available Widths1′, 2′, 3′, 4′, 5′, 6′”

NOTE: All angles are at 90°, which assumes both top and bottom main rails are level and parallel to one
another and that your posts are plumb.

Any bowing of your frame material, your posts not being plumb or your top rail not being level is the
responsibility of the craftsman who built it.

All railings are designed and laid out to maximize the total end space between the last baluster on each
end and their nearest post.

Available Height30.5″
Available Widths6” – 72”

NOTE: All angles are at 90°, which assumes both top and bottom main rails are level and parallel to one
another and that your posts are plumb.

Any bowing of your frame material, your posts not being plumb or your top rail not being level is the
responsibility of the craftsman who built it.

All railings are designed and laid out to maximize the total end space between the last baluster on each
end and their nearest post.

 

Wood SpeciesAlaskan Yellow Cedar
ClarityClear, Tight Knot as Available
Baluster Dimensions1 3/8” x 1 3/8”
Spacing Between Balusters3 ½”
Sub Rail Width2 ½”
Sub Rail Thickness¾”
StainableYes
PaintableYes
Fail Not Infill Structural Rail Hardware System-Patent PendingOption Available on Custom Size and Clear Only
Removable for maintenanceYes
  1. Standard Sizing may require cutting sub rail ends. See ”Cutting Sub Rail Ends” directions 
  2. Due to the ornate horizontal cross designs, cutting the standard sizing railing inserts down beyond the first baluster at each end is not recommended as it will not turn out in a desirable look. Your distance between posts is important when purchasing the Standard Sizing Rail Inserts. The available Sizing Widths in the Standard Sizing is specific to ensure the design is consistent.
  3. Custom fit products may require adjustments by sanding either the frame or the product ends due to inaccurate measurements, lumber bowing or twisting on the existing frame or the existing frame not being level or plumb as needed. These are and have always been standard and routine concerns of installers whether being built in the field or using other types of products. We at Fence Quarter double check all our work and compare to the dimensions provided to us for accuracy. Our goal is to make the installation a breeze.
  4. Any Horizontal detail between the post and the last baluster is designed not to be there.
  5. The Horizontal detail will always remain the same measurements from the top railing insert top sub rail.
  1. It is the Installers responsibility to understand the local Building Codes
  2. Fence Quarter will not be responsible for the following connections: Post to Deck: The Craftsman, Contractor, Homeowner, Builder or combination thereof shall ensure that the posts to the deck railing system are properly attached to the deck floor frame with appropriate and common engineered methods Upper and Lower Rails to Post: It is the responsibility of the Craftsman, Contractor, Homeowner, Builder or combination thereof to secure the rail to the posts, on either side of the upper and lower rail connection to the posts in a way that is properly engineered or strong enough to withstand forces that may apply brunt forces against the connection.
  3. Fence Quarter’s Deck Railing Inserts like the Bellevue is built exceptionally well. Our job is to ensure the railing withstands blunt forces that meet building codes and that the Insert has a good connection to the upper and lower rails.
  4. If the FAIL NOT Hardware System is used, you accept all risk when the Insert is not in position and securely fastened per Manufacturers Instructions.

* in comparison to Western Red Cedar ** most of the time your frame posts are in good shape and often do not need replacement, your rails not so much, but time to time the rails are in good shape as well.

Mailing Address

North Carolina Fence Quarter Plant
Fence Quarter Corporate Office and Manufacturing
PO Box 163
Conover, North Carolina 28613

Hours

open
  • Mon - Fri: 8:00am - 08:00pm EST
  • Sat. - 9am-3pm EST
NADRA

Contact Us

Contact Fence Quarter


Fence Quarter takes great pride to source and build our products here in the USA. Our lumber and carbon fiber materials are indeed 100% sourced inside the USA. Our manufacturing facilities are located right here in the USA.


Fence Quarter has partnered with Sherwin Williams because Sherwin Williams formulas have been designed to withstand harsh weather conditions. For twenty years, the founder of Fence Quarter personally applied Sherman Williams products and can attest to the durability their product line.

mark of the crow
The Crow has been a significant icon to the founder, Christopher Price since childhood. Over the years he has been fascinated with the characteristics of the crow and began equating this magnificent bird to life and business ethics.

So naturally Fence Quarter has adopted the Crow as its official mascot. The Company always shoots straight, as straight as the Crow flies. We are resourceful, social, and family oriented, all known traits of the Crow. Like the Crow, we remember very well and morn our own. The Crow will protect and ward off competitors, we’ll call them Eagles or in business , the larger corporations.

The Crow is iconic and will be easily recognizable, so when you start to see the Crow on the store shelves, you will know that the Mark of the Crow means an embodiment of a solid, well put together and long lasting product.


We at Fence Quarter love to create and build, just like our custom QA Built logo you see here.  This icon is not just a symbol, but it represents our values applied directly to the design, engineering, manufacturing and delivery of our products.