Shop | FENCE QUARTER https://fencequarter.com/shop/ DECK AND RAILING INSERTS Tue, 05 Oct 2021 21:16:56 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://fencequarter.com/wp-content/uploads/2018/06/cropped-fence-32x32.png Shop | FENCE QUARTER https://fencequarter.com/shop/ 32 32 Tool Box Rental https://fencequarter.com/product/tool-box-rental/ Tue, 01 Dec 2020 19:04:55 +0000 https://fencequarter.com/?post_type=product&p=5361 Welcome to the Fence Quarter Rental Division where we rent the tool kit you need for the measuring and installation of our Deck Railing Inserts with the FAIL NOT(TM) Hardware System.  You are given 20 calendar days from date of rental to placing the Tool Kit back in the mail to Fence Quarter.

The post Tool Box Rental appeared first on FENCE QUARTER.

]]>
The Fence Quarter Tool Box contains everything you need to install your Fence Quarter Deck Railing Inserts with the FAIL NOTTM hardware.

The Tool Box is made of a sturdy, heavy duty composite material and is reinforced with modeled foam to keep your tools safe and secure.

This tool kit is designed for a Main Rail size of a 2×4 or 2×6 main rail and is specific for our Optional Carbon Fiber FAIL NOT Hardware System only. The adjustable centering jigs speed up the installation of the FAIL NOT Hardware while perfectly centering the Insert System between the posts. There is no need to pull your tape measure out with this system. The custom made drill bore set gives the perfect depth drill hole for mounting our Stainless Steel Flanged screws into place.

The tool box includes:

Hand Clamps
Position Tool
Stubby Ratchet
Counter Bore Driver
Counter Bore Drill Set
Counter Bore Drill Bit
Lockdown Screwdriver
Lockdown Screw Bit Driver
Lockdown Screw Mount Driver

The post Tool Box Rental appeared first on FENCE QUARTER.

]]>
Landmark https://fencequarter.com/product/the-landmark/ Thu, 04 Jun 2020 13:44:46 +0000 https://fencequarter.com/?post_type=product&p=4446 The Landmark
Our classic railing inserts bring back the traditional look that goes with any home for a timeless feel.

The post Landmark appeared first on FENCE QUARTER.

]]>
The Landmark
Our classic railing inserts bring back the traditional look that goes with any home for a timeless feel.

Standard sizes:  The lengths come in 2′,3′,4′,5′ & 6’ sections at a height of 30.5″

Custom Sizes: 6″ – 6′  Custom sizes where you input your length measurements up to 6’ in length, we will then cut to your required size for quicker installations.

  • CODE COMPLIANT
  • Pre-assembled for easy installation
  • Inserts can be used with existing posts and rails
  • Strong and Durable:  All Railing Inserts are tested by a third party testing firm, meet and exceed (UBC) Uniform Building Code and (IRC) International Building Code.  In fact, our FAIL NOT Hardware System exceeds the code over 11 times
  • Pest and weather resistant
  • Removable for easy cleaning, painting and maintenance
  • Can be ordered pre-primed with two coats of oil-based primer and Primed and Painted with two coats of top shelf Sherwin Williams latex paint.  Color only available in Semi-Gloss (white)
  • Optional Patented FAIL NOT Carbon Hardware System – Only available on Custom Sized Clear Alaskan Yellow Cedar
  • Manufactured in the USA

The post Landmark appeared first on FENCE QUARTER.

]]>
Fence Quarter Brochure https://fencequarter.com/product/fence-quarter-brochure/ Tue, 28 Jan 2020 23:35:20 +0000 https://fencequarter.com/?post_type=product&p=3658 Order your free Fence Quarter brochure to learn about the Fence Quarter Deck Railing Inserts as well as tools.

The post Fence Quarter Brochure appeared first on FENCE QUARTER.

]]>
The post Fence Quarter Brochure appeared first on FENCE QUARTER.

]]>
Fence Quarter Deck Railing Sample Kit https://fencequarter.com/product/fence-quarter-deck-railing-sample-kit/ Fri, 17 Jan 2020 22:08:00 +0000 https://fencequarter.com/?post_type=product&p=3581 Want to see samples of our Fence Quarter Deck Railing Inserts from the comforts of your home or office? Now you can with the Fence Quarter Deck Railing Sample Kit.

The sample kit includes a Baluster, Standard Sub-rail, Sub-rail with FAIL-NOTTM Hardware and a spiral bound book.

The cost of the Fence Quarter Sample kit is $19.99 but we will reimbursement you, if you purchase our high-quality, Deck Railing Inserts.

The post Fence Quarter Deck Railing Sample Kit appeared first on FENCE QUARTER.

]]>
The post Fence Quarter Deck Railing Sample Kit appeared first on FENCE QUARTER.

]]>
Tool Box https://fencequarter.com/product/tool-box/ Fri, 17 Jan 2020 21:56:28 +0000 https://fencequarter.com/?post_type=product&p=3576 FAIL NOT TOOL KIT

The Fence Quarter Tool Box contains everything you need to install your Fence Quarter Deck Railing Inserts with the FAIL NOTTM hardware.

The Tool Box is made of a sturdy, heavy duty composite material and is reinforced with modeled foam to keep your tools safe and secure.

This tool kit is designed for a Main Rail size of a 2x4 or 2x6 main rail and is specific for our Optional Carbon Fiber FAIL NOT Hardware System only. The adjustable centering jigs speed up the installation of the FAIL NOT Hardware while perfectly centering the Insert System between the posts. There is no need to pull your tape measure out with this system. The custom made drill bore set gives the perfect depth drill hole for mounting our Stainless Steel Flanged screws into place.

The tool box includes:

  • Hand Clamps
  • Position Tool
  • Stubby Ratchet
  • Counter Bore Driver
  • Counter Bore Drill Set
  • Counter Bore Drill Bit
  • Lockdown Screwdriver
  • Lockdown Screw Bit Driver
  • Lockdown Screw Mount Driver

Additional information can be found here.

The post Tool Box appeared first on FENCE QUARTER.

]]>
The post Tool Box appeared first on FENCE QUARTER.

]]>
MEASURE NOTTM System – DECK https://fencequarter.com/product/measure-nottm-system-deck/ Thu, 14 Nov 2019 00:32:15 +0000 https://fencequarter.com/?post_type=product&p=3075 ARE YOU BUILDING A WOOD DECK ? .....  THEN YOU NEED THIS TOOL !

Fence Quarter’s MEASURE NOTTM System helps you get the most accurate measurements between your deck railing main rails without a tape measure.  Each size allows for a different deck railing frame configuration to meet the minimum 36″ high deck railing code requirements.  See the architectural details in the photos for more details.

Each size sold separately.  Each size contains (2) MEASURE NOT's

  • Faster Deck Frame Install
  • Increased Accuracy
  • Light Weight
  • Easy to find
  • Weather Proof

There is a MEASURE NOT for both your decks and stairs.  To purchase the STAIRS MEASURE NOT, go to the STAIRS Cart Item.

Available Sizes
Deck = 30.5”, 31.5″, and 32.

Pro Tip:

If you are using this product with our Deck Railing Inserts you must use the 30.5″ MEASURE NOT

Our Deck Railing Inserts will fit perfectly into the opening.

Clamps not included.

Additional information can be found here.

Installation Guides an

The post MEASURE NOT<sup>TM</sup> System – DECK appeared first on FENCE QUARTER.

]]>
The post MEASURE NOT<sup>TM</sup> System – DECK appeared first on FENCE QUARTER.

]]>
MEASURE NOTTM System STAIRS https://fencequarter.com/product/measure-nottm-system-stairs/ Thu, 14 Nov 2019 00:31:37 +0000 https://fencequarter.com/?post_type=product&p=3069 ARE YOU BUILDING WOOD STAIRS? .....  THEN YOU NEED THIS TOOL !

Fence Quarter’s MEASURE NOTTM System helps you get the most accurate measurements between your deck railing stair main rails without a tape measure.  The ends of this STAIR MEASURE NOT are angled to a precise 32.5 degree angle, which is one of the most standard angles on a deck stair system. The 32.5 Degree is based off the 11" tread and 7" riser stringers used in making stairs.

The Big Box stores carry typically a 7" 11" 32.5 degree stair stringer but are often poorly cut on a regular basis which means you may have problems with correct measurements and assembly.  It is easy to cut your own stair stringer with lots of resources online on how to.  FENCE QUARTER does make stair railing inserts to fit within our MEASURE NOT - Stair Tool for a perfect fit every time.

See the architectural details in the photos for more details.

  • Faster Deck Frame Install
  • Increased Accuracy
  • Light Weight
  • Easy to find
  • Weather Proof

There is a MEASURE NOT for both your decks and stairs.  To purchase the DECK MEASURE NOT, go to the DECK Cart Item.

Available Sizes
Stairs = 7/11/32.5 (7” Riser, 11” Tread, 32.5 Degrees)

Our Stair Railing Inserts will fit perfectly into the opening.

Clamps not included.

Additional information can be found here.

Installation Guides an

Contains a Set of 2

 

 

The post MEASURE NOT<sup>TM</sup> System STAIRS appeared first on FENCE QUARTER.

]]>
The post MEASURE NOT<sup>TM</sup> System STAIRS appeared first on FENCE QUARTER.

]]>
Torrey Pine https://fencequarter.com/product/torrey-pine-2/ Sat, 28 Sep 2019 12:05:06 +0000 https://fencequarter.com/?post_type=product&p=2255 Torrey Pine
Although we use a top-grade Alaskan Yellow Cedar, our Torrey Pines design represents the

The post Torrey Pine appeared first on FENCE QUARTER.

]]>
Torrey Pine
Although we use a top-grade Alaskan Yellow Cedar, our Torrey Pines design represents the tall and majestic trees that are prevalent in the United States.

This simple yet intelligent design will always add value to your home.

Standard sizes:  The lengths come in 2′,3′,4′,5′ & 6’ sections at a height of 30.5″

Custom Sizes: 6″ – 6′  Custom sizes where you input your length measurements up to 6’ in length, we will then cut to your required size for quicker installations.

  • CODE COMPLIANT
  • Pre-assembled for easy installation
  • Inserts can be used with existing posts and rails
  • Strong and Durable:  All Railing Inserts are tested by a third party testing firm, meet and exceed (UBC) Uniform Building Code and (IRC) International Building Code.  In fact, our FAIL NOT Hardware System exceeds the code over 11 times
  • Pest and weather resistant
  • Removable for easy cleaning, painting and maintenance
  • Can be ordered pre-primed with two coats of oil-based primer and Primed and Painted with two coats of top shelf Sherwin Williams latex paint.  Color only available in Semi-Gloss (white)
  • Optional Patented FAIL NOT Carbon Hardware System – Only available on Custom Sized Clear Alaskan Yellow Cedar
  • Manufactured in the USA

The post Torrey Pine appeared first on FENCE QUARTER.

]]>
Bellevue https://fencequarter.com/product/bellevue-2/ Thu, 26 Sep 2019 11:35:55 +0000 https://fencequarter.com/?post_type=product&p=2235 The Bellevue
This Beautiful railing insert design offers a hint of Asian beauty but while it has a strong, durable

The post Bellevue appeared first on FENCE QUARTER.

]]>
The Bellevue
This Beautiful railing insert design offers a hint of Asian beauty but while it has a strong, durable, and prestigious feel, it will accessorize your home all year long.

Standard sizes: The lengths come in 23”, 42”, 62”, 72” sections at a height of 30.5″

Custom Sizes: 6″ – 6′  Custom sizes where you input your length measurements up to 6’ in length, we will then cut to your required size for quicker installations.

  • CODE COMPLIANT
  • Pre-assembled for easy installation
  • Inserts can be used with existing posts and rails
  • Strong and Durable:  All Railing Inserts are tested by a third party testing firm, meet and exceed (UBC) Uniform Building Code and (IRC) International Building Code.  In fact, our FAIL NOT Hardware System exceeds the code over 11 times
  • Pest and weather resistant
  • Removable for easy cleaning, painting and maintenance
  • Can be ordered pre-primed with two coats of oil-based primer and Primed and Painted with two coats of top shelf Sherwin Williams latex paint.  Color only available in Semi-Gloss (white)
  • Optional Patented FAIL NOT Carbon Hardware System
  • Manufactured in the USA

The post Bellevue appeared first on FENCE QUARTER.

]]>
Positioning Tool & Clamp Kit https://fencequarter.com/product/positioning-tool-clamp-kit/ Thu, 15 Aug 2019 20:38:09 +0000 https://fencequarter.com/?post_type=product&p=1993 This kit contains the Fence Quarter Positioning Tool as well as the hand clamps.

Fence Quarter’s hand clamps are used in conjunction with the FN-T3 Positioning Tool.

Although these clamps were designed for our system, they are handy for many other projects as well.

Fence Quarter’s positioning tool, although not required, is designed to make your installation of the Fail Not Hardware System faster, easier and more accurate. Installation of each railing section requires (2) of these and automatically positions the Carbon Fiber from front to back.

Made from virtually unbreakable Polycarbonate and aluminum, this tool is a handy addition to the Installation of Fence Quarter’s Fail Not Hardware System.

Lifetime Warranty from normal use. The rubber handles and clamping covers are guaranteed not to come off during the life of our product.

Do not expose to moisture or leave outside.

Additional information can be found here.

The post Positioning Tool & Clamp Kit appeared first on FENCE QUARTER.

]]>
The post Positioning Tool & Clamp Kit appeared first on FENCE QUARTER.

]]>